Automated window machining center SAC F/6 - refurbished

• Compact and professional equipment, used for automatic plugging and profiling of laminated wood door and window frames;
• The operator will work from the front of the machine, and not from behind the planing tables, as in the classic models. This is possible due to the transverse movement of the tapping table, with the help of an electric motor, being accelerated by the chain.
• Equipped with slat recovery unit.
• It has an adjustable front arm to support the mounted frame, when it is machined on the outside.
• Equipped with pneumatic piston for fixing material.
• The moving speed of the moving table is adjustable from the potentiometer converter.
• Independent hydraulic pump for vertical positioning units for each unit.
• Extendable transverse ruler.
• Transverse ruler equipped with limiter.
• Sliding with an assembly of cylindrical rails and linear bearings.   Angular window machining center with automatic return towards the operator
Min/max workpiece length: 280 mm / 2600 mm.
Min/max workpiece width: 20 mm/ 300 mm
Min/max workpiece thickness: 20 mm/ 100 mm

Feedmotor of the tenoning table: 0,75 kW
Feedspeed of the tenoning table: 3 to 20 m/min
Feedmotor in the profiling area: 0,75 kW
Feedspeed in the profiling area: 3 to 20 m/min.
Number and diameter of the feedrollers: 14 / 145 mm.
Hydraulic power pack motor 0,75 kW
Automatic return towards the operator

Equipment:
-Cut-off saw:
Motor 3 kW, 3000 r/min
Spindle diameter 30 mm
Sawblade diameter 400 mm
Horizontal adjustment of the sawblade over 100 mm
Revolver fences for this horizontal positioning: 16
-Tenoning by 2 spindles:
Automatic positioning of both spindles on 4 levels
Power each motor: 11 kW, 3000 r/min
Diameter and length of each spindle: 50 mm / 320 mm.
Vertical stroke of each spindle: 255 mm.
Max. tool diameter: 350 mm.
-Profiling by 4 spindles:
2 programmable profiling spindles with each 3 levels
Motor of each spindle: 7,5 kW, 6000 r/min
Spindle diameter and length: 50 mm / 270 mm.
Vertical stroke of the spindles: 170 mm.
Max. tool diameter: 240 mm.
Vertical saw to make the rebate of the glass-fixing part of the window:
Motor 2,2 kW, 6000 r/min
Sawbladediameter: 200 mm, spindle 30 mm.
Additional spindle make the groove for the hardware:
Motor 3 kW, 6000 r/min
Tooldiameter 160 mm, spindlediameter 30 mm.
Horizontal adjustment over 35 mm   *The price does NOT include shipping cost or other taxes. All prices are in EUR.